Daily Posts

The linea M Imaging Module family with Field of Views from 7mm to 28mm with Working distances from 87mm to 202mm and with an without Ring Light can be perfect Imaging sensor for additional surveillance of Quality control tasks inside your machine or as a stand alone documentation station.

Our new solino Imaging Modules will enable live computing of minimum 4 Images parallel. solino allows to compute particular Images for a quick evaluation of Anomalies. Here shall demo with coins. AI-ready images with our Imaging Modules. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“.

We automate Microscopy. Perfect contrasted Images for Biomed Applications. Multifluorescence, Double view to substitute Zoom or only a nice Image. Together with X-Y-Z Automation for machine Integration or your own Software development for your OEM application. All out of one Hand.

To digitize quickly the Quality of your machined parts close to production, it is essential to have as much info as possible. That is why Imaging is a perfect tool to do so. With the Opto Machine Vision Microscope and a FoV of 2,2x1,8mm and a micron resolution you are able to visualize and store Anomalies easily with only one Klick. The two different Illumination Technologies Dark-field and Bright-field allows especially metallic parts to show their properties perfectly. The FREE OptoViewer enables quick measurements, as the Module is always pre-calibrated, or making Annotations to highlight special Features. With the USB 3.0 Interface you can have the Image in less then one Minute live on your Laptop.

The Opto Portable Microscope is designed to offer the ultimate solution in portable microscopy. With its ergonomic design, robust build quality, and perfectly optimized optical configuration, the Opto Portable Microscope is ready to take on the most demanding field microscopy inspections.

Digital Microscope- and intelligent Vision Sensors for integrators and machine builders

This is the Image Acquisition sequence of our new solino modules of a painting. If you want to see the solino results write here and I will send you. solino allows to compute particular Images for a quick evaluation of Anomalies. AI-ready images with our Imaging Modules. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“.
https://youtu.be/XpSX6UXXIvQ

We automate Microscopy. Multifluorescence, Double view to substitute Zoom or only a nice Image. Together with X-Y-Z Automation for machine Integration or your own Software development for your OEM application. All out of one Hand.

A perfect image of stressed wires inside a crimped part. Visualized with the Machine Vision Microscope from Opto. EPI illumination and the color IMX264 5M Sensor enables maximum resolution with biggest FoV. All Opto Imaging Modules come with a FREE OptoViewer Software.

A die in a ceramic socket visualized perfectly with solino. solino is perfect where high and low reflective surfaces cause imaging problems. solino allows to compute particular Images for a quick evaluation of Anomalies. AI-ready images with our Imaging Modules. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“.

We automate Microscopy. If you need to change your fluorescence filters inside your screening machine in milliseconds, ask for the Opto high speed multifluorescence filter wheel. With Autofocus, Multifluorescence and many Software and Hardware options for your OEM application.

A small detail of a mechanical watch. EPI illumination enables measurement of the half moon details. Images were taken with the Opto Machine Vision Microscope. All Opto Imaging Modules come with a FREE OptoViewer Software.

Biomed Imaging - Opto already provides automated Multifluorescence microscopes for cell analysis, autofocus inverse microscopes for motion analysis of growth processes as well as high throughput fluorescence microscopes for DNA and RNA sequencing. Miniaturized optical Imaging Modules from Opto can be found inside the machines of world market leaders in a wide variety of high Technology applications.

This is how a shiny and flat marble looks like when imaged and computed with solino. Anybody an idea what we are seeing here?
https://lnkd.in/d4v88_Q

For Wirebond Inspection where high and low reflective surfaces cause imaging problems solino is perfect. solino allows to compute particular Images for a quick evaluation of Anomalies. AI-ready images with our Imaging Modules. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“.

We automate Microscopy. For Applications where you can’t move the sample we move the microscope in Micron precision. With Autofocus, Multifluorescence and many Software and Hardware options for your OEM application.

From Setup to a stored Image in less than one Minute. All Opto Imaging Modules come with a FREE OptoViewer Software.
Ask us or one of our partners. We will make you a demo.

Particle Standard Target allow the calibration of measurement functions in microscopes through objects in different forms and sizes or of resolution of an optical system measured in Line Pairs per mm. The Target allows the calibration of measurement functions in microscopes, to analyze particles and measured. A field of objects in different forms and sizes allow the user to check: rectangles, ellipsis, circles, rings and even fibre-shaped objects. The smallest Object is as small as 5μm

Radiant Optronics Pte Ltd specializes in applying the latest technology developments to Failure Analysis applications with a strong focus in the Semiconductor field, Wafer Fabrication, Service Laboratories, Packaging and PCB Assembly Houses are all rapidly expanding in Asia. Their diverse customer base includes organizations in the Electronics, Semiconductor, R & D Institutions and BioTech sectors.
We are pleased to enter this collaboration with Radiant Optronics as our official distributor in Singapore for our extensive range of Leica microscope accessories. With their business network and their many successful years of representing Leica, we look forward in supporting their customers with our range of accessories.
Welcome onboard!
https://www.radiantoptronics.com/

solino allows to Compute Particular Images for a quick evaluation of Anomalies. AI-ready images with our Imaging Modules. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“.

The Imaging Modules are results out of many years of R&D and many research projects together with Universities and Companies. One of the latest was with the IPHT in Jena to track pollen in a microfluidic chip and develop special Imaging Modules and a tracking software to create 3D morphology images to classify them by analyzing the morphology.

Metallurgical samples can be perfectly analyzed with the Opto Machine Vision Microscope and the integrated Coaxial Illumination.

Reserve the date tomorrow - Attend the SpectroNet Collaboration Conference tomorrow, 16 March and listen to Markus Riedi's talk on: solino and the approach to optical characterisation at 1.15 pm.
https://www.spectronet.de/post/spectronet-collaboration-conference-2021-karlsruhe-online

We are excited and pleased to announce that with immediate effect, China National Pharmaceutical Foreign Trade Corporation (SINOPHARM FOREIGN TRADE) will be our official distributor for the territory of China.
Being a high-prestige company, SINOPHARM FOREIGN TRADE owns extensive experience in microscopy and digital imaging. By combining both our expertise in Advance Imaging Technologies & Micro Inspection Techniques, plus having access to a nation-wide distribution network of channels and enterprise markets, we can forge ahead with Opto’s proven high precision Imaging Modules and solutions. Established in 1981, SINOPHARM FOREIGN TRADE is a wholly owned subsidiary of China National Pharmaceutical Group Co., Ltd. (SINOPHARM), a leading medical and healthcare group in China.
We look forward to this long-term relationship and the success of our business collaboration.
www.sinopharm.com/

solino allows to Compute Particular Images for a quick evaluation of Anomalies. AI-ready images with our Imaging Modules. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“.

The Opto Imaging Modules are perfect tools for Multidirectional Bioparticle Imaging. The Imaging Modules are perfect Micro Imaging tools to work together with newest Microfluidic Chip Geometries. The composition and quality of particles and especially particles gaining increasingly importance in industrial production, material sciences and quality assurance. Particles are ubiquity spread entities in nature, medicine and technology. The morphological properties of particles such as size, diameter and color are an important quality feature for the process control and quality assurance.

Why not completely mobile. With our new Imaging Modules and our portable stand it can be a perfect solution for many metallurgical imaging needs.

Reserve the date - Visit the SpectroNet Collaboration Conference on 16 March and listen to Markus Riedi's talk at 13.15 on the topic: solino and the approach to optical characterisation.
https://www.spectronet.de/post/spectronet-collaboration-conference-2021-karlsruhe-online

Established in 1990, Onset Electro-Optics Co. Ltd is based in Taipei, Taiwan and has been a leader in the industry in terms of laser systems, optoelectronic instruments, optical components and equipment. In recent years, it has been widely praised in the field of optoelectronic system integration.
We are proud to work alongside Onset Electro-Optics as our distributor and together, we will successfully forge ahead in the micro inspection markets with our proven vision solutions.
https://www.onset-eo.com/

Black Numbers on black Rubber. Perfect result with solino. Thats only the beginning what solino can do with our Imaging Modules. Huge progress in designing the new solino Imaging Module platform. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“. solino allows to Compute Particular Images for a quick evaluation of Anomalies.

In channels with small cross-sections laminar flow conditions prevail. The mixing of the droplets is realized by the arrangement of the arch structures. The control of the mixing behavior must be monitored spatially and temporally. A typical field of application is the recording of reaction kinetics. Multifluorescence digital microscopes, High speed Image acquisition modules and easy cloud computing functionality integrated in an ultra compact form factor is needed to realize a high throughput analysis. This is what the Opto Imaging Modules are designed for.

All Imaging Modules from Opto can be upgraded with many Software features directly dedicated for your Application. With more the 20 years experience in Machine Vision programming there are many options still available.

Calibration Target Micro V1 - Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target Micro V1 is unique in that it combines very useful resolution data, combined with ultra-high definition micro features, together enabling efficient and accurate optimization of any optical setup.

We are happy to announce our new cooperation with OKO MACHINE as distributor and sales partner in the Ukraine. OKO MACHINE develops and implements solutions for the tasks of automating machine vision processes using modern components and reliable software. OKO MACHINE concentrates on Image processing applications and implements cameras, lenses together with the right Software into industrial automation solutions. OKO MACHINE is provider of reliable machine vision technologies at an affordable price and in a short time.
We are looking forward to a great cooperation with OKO Machine.
https://oko-machine.com/en

The blister tape shows perfectly the core value of our solino technology. The reflection behavior extracts Anomalies. Also Prints, hight differences are Do you want to automatically highlights Anomalies? Try solino. No reflections of the surface. No color effect due to different material properties. Thats only the beginning what solino can do with our Imaging Modules. Huge progress in designing the new solino Imaging Module platform. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“. solino allows to Compute Particular Images for a quick evaluation of Anomalies.

Our Fluorescence Imaging Modules allow to automate new microfluidic applications that have to find their way out of stand alone R&D setups into POCT devices.
Copy number variation (CNV), Rare sequence detection, Gene expression, Single-cell analysis, Pathogen detection or Next-generation sequencing (NGS) are applications that need newest Imaging Technologies. Multifluorescence digital microscopes, High speed Image acquisition modules and easy cloud computing functionality integrated in an ultra compact form factor is needed to realize a high throughput analysis. This is what the Opto Imaging Modules are designed for.

Have you ever seen a digital microscope with coax and ringlight as compact as this. Metallography and in Semiconductor market Coaxial Light is essential to see your product. With the Opto Machine Vision Microscope and a FoV of 2,2x1,8mm and a micron resolution you are able to visualize and store Anomalies easily with only one Klick. The FREE OptoViewer enables quick measurements, as the Module is always pre-calibrated, or making Annotations to highlight special Features. With the USB 3.0 Interface you can have the Image in less then one Minute live on your Laptop.

Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With our Oblique Viewing Module for Stereomicroscopes, it is possible to view your sample under an angle and are able to change your direction of control by 360°.

Fainstec Co., Ltd. was established in 2009 to offer "Beyond Machine Vision Solutions" for their customers in semiconductor, display, chemical, food, bio, and more.
They are used to deliver new products according to the rapidly changing market trends in South Korea. Fainstec is recognized and appreciated by their customers for 1:1 customized solutions.
Fainstec is always on the move to open-minded, people-oriented businesses.
At Opto, we are excited and pleased about having Fainstec Co., Ltd as our newly appointed distributor for the territory of South Korea and together, our goal is to provide world class optical solutions for advanced micro imaging applications.
http://www.fainstec.com/kr

Glare free Bond Wire Images with solino from Opto.
Are you bored with glare and lack of contrast in your Image? Do you want to automatically highlights Anomalies? Try solino. No reflections of the surface. No color effect due to different material properties. Thats only the beginning what solino can do with our Imaging Modules. Huge progress in designing the new solino Imaging Module platform. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“. solino allows to Compute Particular Images for a quick evaluation of Anomalies.

Together with the IPHT in Jena Opto concentrates on on solving Microfluidic Applications with Opto Own Imaging Technologies. Multidirectional imaging flow cytometry (mIFC) extends conventional imaging flow cytometry (IFC) for the image-based measurement of 3D-geometrical features of particles. To classify Pollen it could be necessary to digitize the different types with high speed Micro Imaging Imaging Modules. Together with machine learning algorithms we can improve the accuracy of automated bio-particle classification.
https://pubs.rsc.org/en/content/articlehtml/2020/lc/d0lc00244e

The optical and digital resolution is mainly driven by the usage of digital Sensors with a defined number and Size of Pixels. We normally use Sony IMX Sensors with a Pixel size of 3,4 Microns in our Imaging Modules. To automate Microscopy also means to optimize the optical and light setup not to the human eye but to a photosensitive CMOS Chip. The Opto Imaging Modules are completely optimized for this. Our new Machine Vision microscope is the first of its kind to be plug and play, robust and for the integration into Machinery or as stand alone in the workshop.

The PHOTONICS+ exhibition and conference starts this week. Contact us to get your free voucher to attend OPTO and the 300+ exhibitors.
Mark your calendar: On Thursday 18 February at 14:20 CET, our CEO Markus Riedi will talk about "Imaging Modules and Software". We will show you OPTO's intelligent digital microscopes and vision sensors for medtech and industrial applications as standard and customised versions.
Visit our virtual stand and book an appointment here: https://www.photonicsplus.com/epic/opto-03
EPIC - EUROPEAN PHOTONICS INDUSTRY CONSORTIUM

We are pleased to announce our new distribution partnership with PT Supra Engineering. Based in Jakarta, Indonesia, PT Supra Engineering has almost 25 years of experience in the industry and with trust & support from 750+ customers. They have grown into one of the leading companies in providing factory automation solution in Indonesia. Other than the sales of technical products for automation, they have experienced engineers to also provide custom-built automation machineries.
Since 2017, they have established a new division that focuses on the provision of Industry 4.0 and Industrial Internet of Things (IIoT) solution – the IoT Division. It gives us great pleasure to welcome our official distributor for Indonesia, PT Supra Engineering to the Opto family. Together, we will provide our Indonesian clients the latest micro inspection solutions for their mission critical applications.
https://supra-engineering.com/

Do you want to analyze coins? Are you bored with glare and lack of contrast in your Image? Do you want to automatically highlights Anomalies? Try solino. No reflections of the surface. No color effect due to different material properties. Thats only the beginning what solino can do with our Imaging Modules. Huge progress in designing the new solino Imaging Module platform. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“. solino allows to Compute Particular Images for a quick evaluation of Anomalies.

The encapsulation of cells or particles is common technique to create defined reaction conditions. A high spatial and spectral resolution is necessary to detect spectral shifts inside the droplets. Multifluorescence digital microscopes, High speed Image acquisition modules and easy cloud computing functionality integrated in an ultra compact form factor is needed to realize a high throughput analysis. This is what the Opto Imaging Modules are designed for.

We automate Microscopy: The Opto Imaging Modules are exactly designed for this. Our new Machine Vision microscope is the first of its kind to be plug and play, robust and for the integration into Machinery or as stand alone in the workshop. With integrated Ringlight and Coaxial LED you can change quickly between two different contrast Technologies. See the images below. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.
Challenge us!

The IVF Version of our Dual Station is a stereomicroscope with digital Mirror for transmitted Light and an integrated inverted digital microscope. It is optimized for IVF treatment. The stereo base contains an integrated LED illumination with Opto 'e-mirror' technology to flexibly adjust the brightness and contrast.
The 200x and 50x integrated inverse microscope features precision focus and an adjustable LED illumination with embedded special contrast enhancing illumination technology for perfect high contrast structural imaging.

We are pleased to announce our new distribution partnership with Scitech, the imaging specialist for the territory of Australia and New Zealand. SciTech is a privately held company that was founded in 1989 by Mr Con Sapounas. Over the past 30 years, SciTech has established itself as a leading distributor, supplier and systems integrator of specialised equipment and instrumentation for the biomedical, physical science and industrial communities in Australia and New Zealand.
The company has a large client base extending into industry, academia and the private sector, and is committed to delivering personalised, user-driven solutions.
Their mission is to provide leading edge state of the art technology and expertise to aid research activities and improve operational performance.
We are extremely happy to welcome Scitech into our Opto family and together, we look forward to expand our business activities and support for our clients Down Under.
https://www.linkedin.com/company/scitech-pty-ltd/about/

Perfect first results with our new planned solino Modules 10x10 to visualize wire bonds. Perfect contrast of the wires. No reflections of the surface. No color effect due to different material properties. Thats only the beginning what solino can do with our Imaging Modules. Huge progress in designing the new solino Imaging Module platform. Plug & Play, cost effective, ultra fast image acquisition and much more. Challenge us for your „Job to be done“. solino allows to Compute Particular Images for a quick evaluation of Anomalies.

Our Fluorescence Imaging Modules allow Digital Droplet PCR in a completely new way and compactness. Digital droplet-based assays are offering promising opportunities for the absolute quantitation of low concentrated analytic species. During the amplification, a fluorescence dye is formed or activated. The positive droplets become fluorescent. Absolute quantitation of the number of target molecules is simplified to the count of fluorescence active droplets in the generated droplet collection. Together with our R&D Partner IPHT in Jena and Fluigent we try to solve more and more challenging imaging tasks for later integration inside new POCT devices.
https://www.fluigent.com/applications/analysis-of-a-commercial-surfactant-for-digital-pcr/

We automate Microscopy. The Opto Imaging Modules are exactly designed for this. Our new Machine Vision microscope is the first of its kind to be plug and play, robust and for the integration into Machinery or as stand alone in the workshop. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. This specific Imaging Module allows the quick change in lighting. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.
Opto produces digital Microscopes and Vision Sensors as Imaging Modules and Job Modules. Our own Software makes the Imaging Modules intelligent for a „Job to be done“ solution, so we called them Job Modules. Challenge us!

https://youtu.be/cqrfTwJ9CIU

Don’t miss out on the new, efficient networking event Photonics+ Virtual Exhibition and Conference on Feb 17-18, 2021 featuring more than 200 exhibitors from 20+ countries. Listen to a total of 30 renowned key note speakers and also get the opportunity to learn more about the latest product from Opto.
Safe the day and register now: https://www.photonicsplus.com/epic/opto-03
We are looking forward to seeing you there!

We are very pleased to welcome Abiz Technology as our new sales Partner in Thailand for our growing Product Portfolio of Imaging Modules.
Abiz Technology develops and implements individual industrial image processing solutions as a system integrator since 2006 for automotive, food and beverage, pharmaceutical, packaging, electrical, and vision guide robotic. The Abiz image processing systems contribute significantly to consistently high product quality, shorter cycle times, more flexibility in production and reliable traceability. In this way the Opto Imaging Modules fits perfectly to their Industry 4.0 solution strategy. We are very excited to explore the Micro market with our Machine Vision Microscopes together as it is a hugely growing market also in Thailand.
I am happy to welcome you to the greater Opto Family for taking care of our clients in Thailand.
https://www.abizsensor.com/

Huge progress in designing the new solino Imaging Module platform. Plug & Play, cost effective, ultra fast image acquisition and much more. We are able to visualize with one setup scratches and other Anomalies. Challenge us. Our Opto Internal Software solutions, together with the solino Technology, will find their way together with our Imaging Modules towards ready Job solutions for one specific Application „Job to be done“. Especially for Field of Views around 10x10mm it is perfectly fitting to our own Hardware products. solino allows to Compute Particular Images for a quick evaluation of Anomalies.

Pollen classification with convoluted neural networks will be the next level in Microbiology. Microfluidic imaging and processing of pollen grains with subsequent automatic recognition and classification of pollen types using artificial convoluted neural networks. The Opto Imaging Modules together with the computational Imaging Know How of our Software team we regularly try to cover new ground with our R&D Partners like the IPHT in Jena.
https://pubs.rsc.org/en/content/articlehtml/2020/lc/d0lc00244e

Have you ever seen a clock Hand in such details with only one Machine Vision Microscope. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. This specific Imaging Module allows the quick change in lighting. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.
Opto produces digital Microscopes and Vision Sensors as Imaging Modules and Job Modules. Our own Software makes the Imaging Modules intelligent for a „Job to be done“ solution, so we called them Job Modules. Challenge us!

The Cleanalyzer is a high-end analytical system designed to examine particles on filters – a key procedure in performing reliable and reproducible evaluation of component cleanliness. Precision mechanical parts machined to exact tolerances are susceptible to damage or malfunction caused by particulate contamination. To address this issue, component cleanliness must be measured, and quantified in order to guarantee full function and to avoid failures due to particulate damage. The Cleanalyzer system is a powerful, fully integrated test platform which enables precision measurement, analysis and documentation of this critical cleanliness indicator. Cleanalyzer is fully compliant with all current particulate standards. The currently valid standards were integrated into the specialized measuring software.

We are very please to have the plug and play integration with the market leading Measurement Software M3 FOV from Metlogix in our offering. Metlogix offers manual and semi Automation functionality to make make your machine together with our Imaging Modules a complete Measurement Machine.

Like here with a washer, you are able to visualize with one setup all scratches and other Anomalies. To extend this solino results we can add image processing to it to create a dedicated automated Job Module. Challenge us. Our Opto Internal Software solutions, together with the solino Technology, will find their way together with our Imaging Modules towards ready Job solutions for one specific Application „Job to be done“. Especially for Field of Views around 10x10mm it is perfectly fitting to our own Hardware products. solino allows to Compute Particular Images for a quick evaluation of Anomalies.

We design Epifluorescence Microscopes with single fluorescence setups up to 16 fluorescences in some seconds. With standard Cameras or high sensitive sensors.
We build our own Optics, Filters and ultracompact, high efficient Light-sources as well as the complete Automation. All in house, all out of one Hand for Machine integration. An additional unique feature is to move the Microscope in X-Y-Z and not the sample with a Micron Precision. For all Application where it is tricky to move the object we at Opto have the right solution ready for you.

Opto produces digital Microscopes and Vision Sensors as Imaging Modules and Job Modules. The variety of possible Imaging Modules is nearly endless. We integrate everything on board level and have a huge modularity in different Camera Sensors, own optical designs from Microscopy and Machine Vision as well as own designed electronics and LED controllers. With the goal to have as less cables from the device and the limited form factors we can reach also challenging price targets and convince with robustness and plug and operate units. Our own Software makes the Imaging Modules intelligent for a „Job to be done“ solution, so we called them Job Modules. Challenge us!

The Opto Portable Microscope is designed to offer the ultimate solution in portable microscopy. With its ergonomic design, robust build quality, and perfectly optimized optical configuration, the Opto Portable Microscope is ready to take on the most demanding field microscopy inspections.

We are very pleased to welcome JM VisTec System as our new sales Partner in Singapore for our growing Product Portfolio of Imaging Modules.
JM VisTec System was founded in 2004 and has a perfect regional presence in APAC. As the leading machine vision specialist, JM VisTec System is nicely prepared to assist our customers with the integration of our Machine Vision Imaging Modules and digital Microscopes into their Application and machinery. The KM VisTec core values are reflected by their national identity; Competitive Quality, Performance Driven & Service Assurance.
To sum it up, JM VisTec System provides unparalleled support to solve complex machine vision applications. I am happy to welcome you to the greater Opto Family for taking care of our clients in Singapore and Malaysia..

Our Opto Internal Software solutions, together with the solino Technology, will find their way together with our Imaging Modules towards ready Job solutions for one specific Application. Especially for Field of Views around 10x10mm it is perfectly fitting to our own Hardware products. solino allows to Compute Particular Images for a quick evaluation of Anomalies. Like here with blister tapes, you are able to visualize with one setup the writing, the topography, the color and other Anomalies.

Droplet-based microfluidics is a technique commonly used to perform experiments and manipulation of substances in the microliter range. The reaction process is usually fast. Therefore it is necessary to resolve the reactions in temporal and spatial resolution. Multifluorescence digital microscopes, High speed Image acquisition modules and easy cloud computing functionality integrated in an ultra compact form factor is needed to realize a high throughput analysis. This is what the Opto Imaging Modules are designed for.

To digitize quickly the Quality of your machined parts close to production, it is essential to have as much information as possible. That is why Imaging is a perfect tool to do so. With the Opto GmbH Machine Vision Microscope and a FoV of 2,2x1,8mm and a micron resolution, you are able to visualize and store Anomalies easily with only one Klick. The two different Illumination Technologies, Dark-field and Bright-field allows, especially for metallic parts, to show their properties perfectly. The FREE OptoViewer enables quick measurements, as the Module is always pre-calibrated, or making Annotations to highlight special Features. With the USB 3.0 Interface you can have the Image in less then one Minute live on your mobile Computer.

Calibration Target Micro V1 - Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target Micro V1 is unique in that it combines very useful resolution data, combined with ultra-high definition micro features, together enabling efficient and accurate optimization of any optical setup.

ASIA will be in the focus of 2021. It is the year to restart heavily our Asia Activities again out of Singapore. Tan Khiang is taking care of our asia pacific business since early 2020. We could, since then, welcome many new distributors and potential OEM customers for our products. We will take the opportunity to present you regularly the activities of our sales partners globally.

Opto internal Software solutions are based on many years of experience in programming applications and strategic OEM packages. We understand our SW capability as an external workforce for our OEM customers and our R&D lab for more and more intelligent Imaging Modules. solino CPI is only one Technology that ensure our AI readiness for our new Job Modules. solino is a software solution to Compute Particular Images from one image set, taking into account the consistency and calibration of the image input. The acquisition consistency drives to BRDF information and CPI permits to decompose this information in sub-layers, with an image as sub-layer.

Opto Imaging Modules are AI-ready tools to digitize a production scenery, product quality or deliver live imaging, exactly where it counts. Inside machines, close to the production or besides manual workplaces. In laboratories or on the shop floor. The compact and robust design allows the use of unknown image quality wherever it is needed. The pre-calibrated Modules allows immediate measurements. Besides the many standard units we are used since 40 years to produce for Machine builders and product manufacturers custom made solutions from the idea to the ready volume production, all out of one hand.

2021 will be a very exciting year for our Imaging Module evolution. Many new Modules will extend the existing product line. Especially for Medtech applications we will concentrate on multi fluorescence Modules for High speed PCR Imaging. For industrial applications more digital microscope versions with standard Magnifications 5x,10x,20,50x will be available for metallurgical solutions. Be excited and stay tuned.

Opto wishes all employees, customers, friends and partners a successful and healthy new year.

Opto wünscht allen Mitarbeitern, Kunden, Freunden und Partnern ein erfolgreiches und gesundes neues Jahr.

Opto wünscht allen Mitarbeitern, Kunden, Freunden und Partnern frohe Weihnachten und einen guten Rutsch ins neue Jahr! Bleiben Sie gesund

Opto wishes all employees, customers, friends and partners a Merry Christmas and a Happy New Year!
Stay healthy

Don’t miss out on the Photonics+ Virtual Exhibition and Conference on Feb 17-18, 2021 featuring more than 200 exhibitors from 20+ countries. Listen to a total of 30 renowned key note speakers and also get the opportunity to learn more about the latest product from Opto.
Pre-register now: https://www.photonicsplus.com/epic/opto-01
We are looking forward to seeing you there!

Imaging Modules are perfect for Industry 4.0 applications. They are designed to be the integral Vision device for Machine Vision or Microscopy tasks in Biomed or industrial machinery. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated (Ring & Coax switchable). One for each application, robust and the best image in its category. It is also perfect for Machine Integration.

The Jointed Coupler are always a reliable attachment for your accessories. A precise mounting and alignment of components is guaranteed. For example, the positioning of a light source always requires stability and no hysteresis during adjustment. Both are possible with the Opto Jointed Couplers (Kniegelenke). Test it for your application. Easy to install, completely lockable, robust.

Our new Field of View Micro Measurement Microscope is the ideal starter kit for onsite Quality-control and the introduction to Industry 4.0. The robust setup and super easy handling, makes it a powerful tool to document and measure your products where they were produced. With the free Optoviewer or the High End Measurement Software MR FOV from Metlogix. All digital and Plug& Play.

Do you need an imaging module? Use our product finder to find the right imaging module for your requirements. It is easy to configure and is constantly updated with the latest modules.

Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With our Oblique Viewing Module for Stereomicroscopes, it is possible to view your sample under an angle and are able to change your direction of control by 360°.

Imaging Modules are perfect for Industry 4.0 applications. They are designed to be the integral Vision device for Machine Vision or Microscopy tasks in Biomed or industrial machinery. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated (Ring & Coax switchable). One for each application, robust and the best image in its category. It is also perfect for Machine Integration.

Biomed Imaging - Opto already provides automated Multifluorescence microscopes for cell analysis, autofocus inverse microscopes for motion analysis of growth processes as well as high throughput fluorescence microscopes for DNA and RNA sequencing. Miniaturized optical Imaging Modules from Opto can be found inside the machines of world market leaders in a wide variety of high Technology applications.

Microscope as built-in version - for our OEM customers we build market specific Microscopes and Vision Stations custom branded in series. As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment. ’reduced to the needs' - for industrial and biomed machinery builders. From Autofocus, Zoom functionality, Board level Camera integration and Software development, from HMI design to plugIns and drivers for the modules, all out of one hand.

Opto GmbH and 1stVISION, Inc will work together in the future. Founded in 1999, 1stVision, Inc. (a division of Next Imaging), based in Andover, Massachusetts, is the largest distributor of machine vision and automation technology products in North America.  The 1stVision team of sales engineers brings more than 200 years of accumulated imaging experience to the market.
"We are extremely enthusiastic about the innovation, breadth and depth of standard and customized products that Opto GmbH produces for our market. The cooperation and teamwork between our two companies is great and we look forward to a successful future together", said Mike Troiano, President and CEO of 1stVision, Inc.

The Machine Vision Microscope is a camera with integrated high-end microscope optics, corresponding electronics, coaxial and ring light and only one USB 3.1 TypC connection. It is a Plug and play Digital Microscope and with the free OptoViewer it is also possible to execute pre calibrated measurements easily.

The Opto Portable Microscope is designed to offer the ultimate solution in portable microscopy. With its ergonomic design, robust build quality, and perfectly optimized optical configuration, the Opto Portable Microscope is ready to take on the most demanding field microscopy inspections.

We design software to support our imaging modules and our OEM partners. Hardware and software from one source with more than 40 years of experience in industry and medical technology. Opto has its own software solutions for Image DATA Management and Computational Imaging. Automate your Process. Join the world of Industry 4.0 and IoT. Opto is your Partner

Calibration Target Micro V1 - Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target Micro V1 is unique in that it combines very useful resolution data, combined with ultra-high definition micro features, together enabling efficient and accurate optimization of any optical setup.

Biomed Imaging - Opto already provides automated Multifluorescence microscopes for cell analysis, autofocus inverse microscopes for motion analysis of growth processes as well as high throughput fluorescence microscopes for DNA and RNA sequencing. Up to 16 Fluorescence images in one setup without changing any setting. Miniaturized optical Imaging Modules from Opto can be found inside the machines of world market leaders in a wide variety of high Technology applications.

Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With the Opto Tilting Stand and Tilting Table, it is possible to position your microscope securely at an angle or to tilt and fix your samples at the desired positions.

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

Our new Field of View Micro Measurement Microscope is the ideal starter kit for onsite Quality-control and the introduction to Industry 4.0. The robust setup and super easy handling, makes it a powerful tool to document and measure your products where they were produced. With the free Optoviewer or the High End Measurement Software MR FOV from Metlogix. All digital and Plug& Play.

No perspective Error for Measurement Applications. Bi-telecentric Objectives were developed for high-precision measurement applications in industrial image processing. The advantage of these high-quality optics is their bilateral telecentric imaging function (i.e. bi-telecentric function). Due to the spatial extension of the object-side telecentricity, three-dimensional objects are imaged perspectively without errors.

Industry 4.0. We have interpreted the 4th Industrial revolution in the way that you will need more sensors to get a holistic approach to Quality. That means to get more information about your product and correlate it with theoretical Know How and interpret them with DATA mining. To measure the Micron, many single Imaging Modules are needed. All with a fixed magnification to get the same image DATA again and again for reliably Image DATA Management.

Opto will exhibit at the virtual exhibition EPIC PHOTONICS+ and present its imaging module and software. Mark your calendar for 17th - 18th February 2021

EPIC - EUROPEAN PHOTONICS INDUSTRY CONSORTIUM

Opto is building custom microscopes. For 40 years we build digital Microscopes for Machine Integration. Our business model is, among other things, the customer-specific design and production dedicated modules for machine builders.

Surface analysis with solino®
solino from Opto and deep learning is the ideal combination for reliable, robust and fast Quality Control. In analyzing the reflections on surfaces, solino detects ALL anomalies for further processing or Learning. With solino it is possible to digitize the human perception of products. In teaching CNN with this information it becomes the ultimate AI solution.

The Machine Vision Microscope with Coaxial Light and with Ring Light from Opto is perfect for analyzing Contact areas on a Semiconductor device. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Where High precision Zooming counts. Featuring the same long-life reliability of our standard zooms, but with the benefits of either stepper or DC encoded motorization options, our Opto motorized zooms are the optimum solution for high precision, machine integrated measurement tasks.

We have a long history in building and adapting equipment to Leica microscopes. From mechanical adapters to optical extensions, from protective equipment to add-on Functionality. We develop functional extensions ranging from purely mechanical solutions like stands and adapters to protective glass holders through to optical solutions like gap tubes, or our oblique and direct view modules.
If you have a special requirement or application, simply contact us.

Imaging Modules are perfect for Industry 4.0 applications. They are designed to be the integral Vision device for Machine Vision or Microscopy tasks in Biomed or industrial machinery. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated (Ring & Coax switchable). One for each application, robust and the best image in its category. It is also perfect for Machine Integration.

The Cleanalyzer is a high-end analytical system designed to examine particles on filters – a key procedure in performing reliable and reproducible evaluation of component cleanliness. Precision mechanical parts machined to exact tolerances are susceptible to damage or malfunction caused by particulate contamination. To address this issue, component cleanliness must be measured, and quantified in order to guarantee full function and to avoid failures due to particulate damage. The Cleanalyzer system is a powerful, fully integrated test platform which enables precision measurement, analysis and documentation of this critical cleanliness indicator. Cleanalyzer is fully compliant with all current particulate standards. The currently valid standards were integrated into the specialized measuring software.

Opto is building own custom made Multi-Fluorescence Microscopes. Up to 16 Fluorescence images in one setup without changing any setting. Completely automated. Mainly for the Integration in Biomed screening machines.

The Jointed Coupler are always a reliable attachment for your accessories. A precise mounting and alignment of components is guaranteed. For example, the positioning of a light source always requires stability and no hysteresis during adjustment. Both are possible with the Opto Jointed Couplers (Kniegelenke). Test it for your application. Easy to install, completely lockable, robust.

The Machine Vision Microscope is excellent for use in medical areas. It is an ideal digital plug & play microscope for the BioMed market. The Imaging Module is perfectly designed for Industry 4.0 applications. All have the same SDK, are ready to mount, ready to measure and have an integrated illumination (coaxial & ring light). They are robust and have the best image in their category. Perfect for machine integration.

The Opto Portable Microscope is designed to offer the ultimate solution in portable microscopy. With its ergonomic design, robust build quality, and perfectly optimized optical configuration, the Opto Portable Microscope is ready to take on the most demanding field microscopy inspections.

Opto Software Engineering - for System Builders and Machine Manufacturers, we design OEM ready SW solutions for desktop and mobile use. Our own Software toolbox "Fortress" allows us to extract quickly custom-made Software solutions for Motion Control, Light Control, Autofocus, Object tracking as well as Memory Management and Big Data analysis.

The Profile Projector IM is a compact all in one telecentric imaging & projection module that delivers a distortion free, perfectly telecentric profile image of a component. With its high magnification, the Profile Projector module isespecially suited to performing profile measurement of needles, implants, special micro screws or micro tools. Its highly compact design makes it suited to a variety of integration possibilities, including inline integration, robot arm integration or deep machine integration.

Microscope targets for advanced calibration. Standard or custom.
Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target with Resolution Test of more than 1000LP. High resolution micro-imaging calibration.
The test Target allows the calibration of measurement functions in microscopes, to analyze particles and measure. A field of objects in different forms and sizes allow the user to check: rectangles, ellipsis, circles, rings and even fibre-shaped objects. To determine optical distortions there are three different sized arrays of cross-targets. The smallest Object is as small as 5μm.

Our new Field of View micro measuring microscope is the ideal starter kit for on-site quality control and introduction to Industry 4.0. The plug&play digital microscope with coaxial and ring light makes it a powerful tool to measure and document your products where they are produced. The free Opto-Viewer or the high-end measurement software M3 FOV from Metlogix complete the product.

Miniaturized optical Imaging Modules from Opto can be found inside the medical devices of world market leaders in a wide variety of high Technology applications including remote automated bacterial fluorescence microscopy, time-lapse high throughput cell processing, high throughput automated blood screening with fluorescence, DNA and RNA sequencing, autofocus inverse microscopes for motion analysis of growth processes, intra ocular lens replacement surgical instrumentation. 

solino from Opto and deep learning is the ideal combination for reliable, robust and fast Quality Control. In analyzing the reflections on surfaces, solino detects ALL anomalies for further processing or Learning. With solino it is possible to digitize the human perception of products. In teaching CNN with this information it becomes the ultimate AI solution.

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

As a contract manufacturer with 40 years of experience and with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment, in series. ’reduced to the needs' - for industrial and biomed machinery builders. From Autofocus, Zoom functionality, OEM Objectives, Special Microscopes, Board level Camera integration and Software development, from HMI design to plugIns and drivers for the modules, all out of one hand.

Test & Measurement - The right image depends on the Application. Think your Quality control new towards AI and Big DATA. To measure the Micron you always need good performance optics to visualize the smallest details. You will find exactly the Imaging Module here for.

The IVF Version of our Dual Station is a stereomicroscope with digital Mirror for transmitted Light and an integrated inverted digital microscope. It is optimized for IVF treatment. The stereo base contains an integrated LED illumination with Opto 'e-mirror' technology to flexibly adjust the brightness and contrast.
The 200x and 50x integrated inverse microscope features precision focus and an adjustable LED illumination with embedded special contrast enhancing illumination technology for perfect high contrast structural imaging.

The Machine Vision Microscope is a camera with integrated high-end microscope optics, corresponding electronics, coaxial and ring light and only one USB 3.1 TypC connection. It is a Plug and play Digital Microscope and with the free OptoViewer it is also possible to execute pre calibrated measurements.

Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With the Opto Tilting Stand and tilting table, it is possible to position your microscope securely at an angle or to tilt and fix your samples at the desired positions.

Deep Learning and AI - in creating an AI solution, it is always important to work closely with the customer to get to know and interpret the products to be analysed. Therefore AI solutions are always project based. Opto uses existing software packages from partners and its own solino interface design to set up CNN (Convolutional Neural Network) and Deep Learning. Opto's AI tool is for Predictive Maintenance, Quality Inspection and Quality Assurance and the automation of manufacturing processes.

Our new Field of View Micro Measurement Microscope is the ideal starter kit for onsite Quality-control and the introduction to Industry 4.0. The robust setup and super easy handling, makes it a powerful tool to document and measure your products where they were produced. With the free Opto Viewer or the High End Measurement Software M3 FOV from Metlogix. All digital and Plug& Play.

The Jointed Coupler are always a reliable attachment for your accessories. A precise mounting and alignment of components is guaranteed. For example, the positioning of a light source always requires stability and no hysteresis during adjustment. Both are possible with the Opto Jointed Couplers (Kniegelenke). Test it for your application. Easy to install, completely lockable, robust.

Job Solutions - Our Job solutions focus on the result not the Image itself. We merge our Imaging Modules with innovative Measurement and Image Analysis Software into intelligent plug and play "Job to be done" Modules. 

Opto is building custom microscopes. For 40 years we build digital Microscopes for Machine Integration. Our business model is, among other things, the customer-specific design and production dedicated modules for industrial and biomed machinery builders - ’reduced to your needs'.

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

Table and Floor Stands - Every microscope or sensor must be positioned, fixed and focused. We have a variety of "Made in Germany - Built to Price" solutions.
Starting with simple standard solutions, an extended arm and mobile solution, up to our new foldable tripods, which are specially designed for our imaging modules to be flexible.

The machine vision microscope is perfect for quick and easy quality control. The digital plug & play microscope with coaxial and ring light illumination allows e.g. a simple incoming or outgoing inspection. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Calibration Targets, Particle standard and object micrometers are used to calibrate measurement systems (line pairs per mm). Objects of defined shape and size are used for this purpose. Optical calibration and resolution testing are critical metrics for understanding and optimizing any optical system. We have targets with more than 1000lp/mm or those with small objects with a size of 5µm. Opto Microscope targets for your advanced calibration.

We design software to support our imaging modules and our OEM partners. Hardware and software from one source with more than 40 years of experience in industry and medical technology. Opto has its own software solutions for Image DATA Management and Computational Imaging. Automate your Process. Join the world of Industry 4.0 and IoT. Opto is your Partner

Find Opto products also at Direct Industry.
At this virtual exhibition you can inform yourself about a wide range of our products and also request individual quotes. You will find Standard Imaging Modules as stand-alone units or for integration into your machine. A perfect platform for a B2B business.
https://www.directindustry.de/prod/opto-69166.html

The Profile Projector IM is a compact all in one telecentric imaging& projection module that delivers a distortion free, perfectly telecentric profile image of a component. With its high magnification, the Profile Projector module isespecially suited to performing profile measurement of needles, implants, special micro screws or micro tools. Its highly compact design makes it suited to a variety of integration possibilities, including inline integration, robot arm integration or deep machine integration.

Industry 4.0. We have interpreted the 4th Industrial revolution in the way that you will need more sensors to get a holistic approach to Quality. That means to get more information about your product and correlate it with theoretical Know How and interpret them with DATA mining. To measure the Micron, many single Imaging Modules are needed. All with a fixed magnification to get the same image DATA again and again for reliably Image DATA Mangement.

Microscope as built-in version - for our OEM customers we build market specific Microscopes and vision stations custom branded in series. As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment. ’reduced to the needs' - for industrial and biomed machinery builders. From Autofocus, Zoom functionality, Board level Camera integration and Software development, from HMI design to plugIns and drivers for the modules, all out of one hand.

solino is a way of interpreting image data in analyzing its stray response instead of the image itself. Image Acquisition is simple, robust and dedicated to the sample. We correlate Reflections with Product Information into a unique DATA set. Based on calibrated illumination angles and Intensity profiles the solino Algorithm is detecting all Anomalies of the surface.

The machine vision microscope is perfect for quick and easy quality control. The digital plug & play microscope with coaxial and ring light illumination allows e.g. a simple incoming or outgoing inspection. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Our new Field of View Micro Measurement Microscope is the ideal starter kit for onsite Quality-control and the introduction to Industry 4.0. The robust setup and super easy handling, makes it a powerful tool to document and measure your products where they were produced. With the free Opto Viewer or the High End Measurement Software M3 FOV from Metlogix. All digital and Plug& Play.

Biomed Imaging - Opto already provides automated Multifluorescence microscopes for cell analysis, autofocus inverse microscopes for motion analysis of growth processes as well as high throughput fluorescence microscopes for DNA and RNA sequencing. Miniaturized optical Imaging Modules from Opto can be found inside the machines of world market leaders in a wide variety of high Technology applications.

One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. Robust and the best image in its category. Perfect for Machine Integration.

For more than 40 years, we have been developing and producing high-end optics and optical devices, which are installed in thousands of machines worldwide.
Machine Vision and microscope optics for machine builders and integrators - we are your partner for optics.

solino from Opto and deep learning is the ideal combination for reliable, robust and fast Quality Control. In analyzing the reflections on surfaces, solino detects ALL anomalies for further processing or Learning. With solino it is possible to digitize the human perception of products. In teaching CNN with this information it becomes the ultimate AI solution.

Opto is building own custom made Multi-Fluorescence Microscopes. Up to 16 Fluorescence images in one setup without changing any setting. Completely automated. Mainly for the Integration in Biomed screening machines.

Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With our Oblique Viewing Module for Stereomicroscopes, it is possible to view your sample under an angle and are able to change your direction of control by 360°.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for all metallurgical samples. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel
With the free OptoViewer it is also possible to execute pre calibrated measurements.

Opto Software Engineering - for System Builders and Machine Manufacturers, we design OEM ready SW solutions for desktop and mobile use. Our own Software toolbox "Fortress" allows us to extract quickly custom-made Software solutions for Motion Control, Light Control, Autofocus, Object tracking as well as Memory Management and Big Data analysi.

The machine vision microscope is perfect for quick and easy quality control. The digital plug & play microscope with coaxial and ring light illumination allows e.g. a simple incoming or outgoing inspection. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Optotelecentric lenses were developed for high-precision measurement applications in industrial image processing. The advantage of these high-quality optics is their bilateral telecentric imaging function (i.e. bi-telecentric function). Due to the spatial extension of the object-side telecentricity, three-dimensional objects are imaged perspectively without errors.

Next week, the W3+Fair starts in Dornbirn / Austria. Come and find out how our Micro Measuring Microscope can help you in your daily business.
Come to the Rheintal and visit us at Booth E4

Opto is building custom microscopes. For 40 years we build digital Microscopes for Machine Integration. Our business model is, among other things, the customer-specific design and production dedicated modules for machine builders.

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

solino is an inspection framework and enables the right decision making about your product Quality in analysing its fair DATA. soling is a way of interpreting image data in analyzing its stray response instead of the image itself. Based on calibrated illumination angles and Intensity profiles the solino Algorithm is detecting all Anomalies of the surface.

If there is no Imaging Module Solution available we design custom specific compact Digital Microscopes for Machine Integration in Industry and BioMed with unique features like: Phase and Hoffmann Contrast, Scheimpflug and 90° folded, Autofocus and X-Y Motorized or Special CMOS Cameras integration

The Opto Portable Microscope is designed to offer the ultimate solution in portable microscopy. With its ergonomic design, robust build quality, and perfectly optimized optical configuration, the Opto Portable Microscope is ready to take on the most demanding field microscopy inspections.

Opto has its own software solutions for Image DATA Management and Computational Imaging. We develop Software over 20 years to support our OEM partners and now for our Imaging Modules. Imaging hardware and software, all out of one hand.

In addition to our imaging modules, we have ongoing deliveries of cylinder inspectors to the major car manufacturers. Non-destructive sample analysis with newest optics inside, optimized for the surface finish. Compatible with cylinder bores from 60 -125mm diameter.

In two weeks, the W3+Fair starts in Dornbirn / Austria. Come and find out how our Micro Measuring Microscope can help you in your daily business. Come to the Rheintal and visit us at Booth E4
https://lnkd.in/dkuWPXd
#W3+Fair #keepdistance #WearAMask #WashYourHands #staysafe

Positioning a light source needs always stability and no hysteresis during adjustment. Both possible with the Opto Jointed Couplers (Kniegelenke). Test it for your application. Easy to instal, completely lockable, robust. We can send you sample immediately.

Opto is building its own ultra compact Multi Fluorescence Light sources, Optics, Cameras and Filter setups that are implemented into Biomed screening machines.

solino is a way of interpreting image data in analyzing its stray response instead of the image itself. Image Acquisition is simple, robust and dedicated to the sample.
We correlate Reflections with Product Information into a unique DATA set.
Based on calibrated illumination angles and Intensity profiles the solino Algorithm is detecting all Anomalies of the surface.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for all metallurgical samples. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel

For Measuring the profile of Needles after production the unique Digital Profile Projector is the perfect Tool. It is the newest member of our Imaging Modules Family. It has a FoV of 8,5x7,1mm. It has a USB 3.1 CMOS Camera and a telecentric light and telecentric lens inside. With 155x145x40mm it is ultra compact. It is a robust Plug and play profile projector for Automation and robotics as well as stand alone applications.

Our new Field of View Micro Measurement Microscope is the ideal starter kit for onsite Quality-control and the introduction to Industry 4.0. The robust setup and super easy handling, makes it a powerful tool to document and measure your products where they were produced. With the free Optoviewer or the High End Measurement Software MR FOV from Metlogix. All digital and Plug& Play.

Microscope targets for advanced calibration. Standard or custom.
Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target with Resolution Test of more than 1000LP. High resolution micro-imaging calibration.
The test Target allows the calibration of measurement functions in microscopes, to analyze particles and measure. A field of objects in different forms and sizes allow the user to check: rectangles, ellipsis, circles, rings and even fibre-shaped objects. To determine optical distortions there are three different sized arrays of cross-targets. The smallest Object is as small as 5μm.

The Cleanalyzer is a high-end analytical system designed to examine particles on filters – a key procedure in performing reliable and reproducible evaluation of component cleanliness. Precision mechanical parts machined to exact tolerances are susceptible to damage or malfunction caused by particulate contamination. To address this issue, component cleanliness must be measured, and quantified in order to guarantee full function and to avoid failures due to particulate damage. The Cleanalyzer system is a powerful, fully integrated test platform which enables precision measurement, analysis and documentation of this critical cleanliness indicator. Cleanalyzer is fully compliant with all current particulate standards. The currently valid standards were integrated into the specialized measuring software.

solino CPI is a software solution to compute one (particular) image from one image set, taking into account the consistency and calibration of the image input.
The acquisition consistency drives to BRDF information and CPI permits to decompose this information in sub-layers, with an image as sub-layer.

We design Epifluorescence Microscopes with single fluorescence setups up to 16 fluorescences in some seconds. With standard Cameras or high sensitive sensors.
We build our own Optics, Filters and ultracompact, high efficient Light-sources as well as the complete Automation. All in house
https://lnkd.in/dnhswA3

The Machine Vision Microscope is equipped with a coaxial light source for highly reflective samples and a ring light for analyzing scratches of the same part or applications with a more structured surface
https://lnkd.in/d6H8xB6

solino analyses the stray response.
solino is a disruptive Technology that can add significant value to the qualification of any quality control procedure
solino is a way of interpreting image data in analyzing its stray response instead of the image itself
The stray behavior is based on the surface structure and is the ideal digital footprint of a product because it has stored in its information the Geometrical data, the Color, the Weaviness, a Super resolution effect and other Anomalies

Scheimpflug allows the tilt of the focal plane in adjusting the camera towards the optical axis. That enables a sharp obejct field while observing under an angle. Opto delivers complete solutions with Software to correct distortion again.

For Printing Roller it is critical to analyze the surfaces and structure. The MVM is perfect to know more about the production and Quality.
The Machine Vision Microscope from Opto is one Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

The IVF Version of our Dual Station is a stereomicroscope with digital Mirror for transmitted Light and an integrated inverted digital microscope. It is optimized for IVF treatment. The stereo base contains an integrated LED illumination with Opto 'e-mirror' technology to flexibly adjust the brightness and contrast.
The 200x and 50x integrated inverse microscope features precision focus and an adjustable LED illumination with embedded special contrast enhancing illumination technology for perfect high contrast structural imaging.

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

solino is computational imaging.
solino is a software tool analyzing the reflection behavior of surfaces and extracting Anomalies.

Opto is building custom made Imaging Modules like 90° digital Microscopes or double view Inspection sensors.
These are samples of our OEM series that we are delivering over years into Industry and Medtech.

For Bond Control you can perfectly differ between structural information in Coax Light mode and the Bond wire connection with the integrated Ring Light.
The Machine Vision Microscope from Opto is one Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Three dimensional objects often benefit from a specific angle of view in order to reveal key details. With the Opto Tilting Stand and tilting table, it is possible to position your microscope securely at an angle or to tilt and fix your samples at the desired positions.

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

solino is computational imaging.
solino is a software tool analyzing the reflection behavior of surfaces and extracting Anomalies.
https://lnkd.in/dhS5ZpD

Opto is building custom made compact Objectives with focussing functionality for existing Vision equipment like Endoscopes or fiber optics.
https://lnkd.in/dzb-S-5

On Glass samples you can measure the structure in Coax Light and detect Scratches and defects with ringlight.
The Machine Vision Microscope from Opto is one Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

The Analysis of inner Cylinder walls was always a Speciality from Opto. Our Cylinderinspector is the master tool in many Automotive Labs. Now more Software features available and even special Targets for Honing Angle Calibration.
https://lnkd.in/dRGZjP5

solino is computational imaging.
solino is a software tool analyzing the reflection behavior of surfaces and extracting Anomalies.
https://lnkd.in/dhS5ZpD

Opto is building custom made screening microscopes with Multi-Fluorescence Microscopes, inverted microscopes, X-Y-Z micro positioning to be integrated in machines.
https://lnkd.in/dzb-S-5

The Machine Vision Microscope with Coaxial Light and with Ring Light from Opto is perfect for analyzing Contact areas on a Semiconductor device. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

This is how our booth could have looked like for Control this year.
One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications.
https://lnkd.in/djHpbpm

As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment. ’reduced to the needs' - for industrial and biomed machinery builders.

solino is computational imaging in perfection. If you want to know all about your sample, even organic material in one shot. Challenge us and find the difference.
https://lnkd.in/dhS5ZpD

Imaging Modules are Plug & Play (One Wire Concept), Compact and Robust (Limited Form Factors), Measurement ready (Many Software Options), LED integrated (Ring & Coax switchable). One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Perfect for Machine Integration.

Opto is building own custom made Multi-Fluorescence Microscopes. Up to 16 Fluorescence images in one setup without changing any setting. Completely automated. Mainly for the Integration in Biomed screening machines.
https://lnkd.in/dzb-S-5

Join the EPIC Meeting to see the newest Trends in Microscopy. Opto will be live - https://lnkd.in/dXdkn-k

The Machine Vision Microscope is the first Market solution out of our Imaging Module Product Family. One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. Robust and the best image in its category. Perfect for Machine Integration.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for analyzing metallurgical samples easily. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

For our OEM customers we build market specific Microscopes and vision stations custom branded in series. As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment. ’reduced to the needs' - for industrial and biomed machinery builders. From Autofocus, Zoom functionality, Board level Camera integration and Software development, from HMI design to plugIns and drivers for the modules, all out of one hand.

Our new Field of View Micro Measurement Microscope is the ideal starter kit for onsite Quality-control and the introduction to Industry 4.0. The robust setup and super easy handling, makes it a powerful tool to document and measure your products where they were produced. With the free Optoviewer or the High End Measurement Software MR FOV from Metlogix. All digital and Plug& Play.
https://lnkd.in/dh8DttV

One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. Robust and the best image in its category. Perfect for Machine Integration.
https://lnkd.in/djHpbpm

solino is computational imaging in perfection. If you want to know all about your sample, even organic material in one shot. Challenge us and find the difference.
https://lnkd.in/dhS5ZpD

For our OEM customers we build market specific Microscopes and vision stations custom branded in series. As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment. ’reduced to the needs' - for industrial and biomed machinery builders. From Autofocus, Zoom functionality, Board level Camera integration and Software development, from HMI design to plugIns and drivers for the modules, all out of one hand.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for analyzing metallurgical samples like for Crimp and Wire Inspection. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.
https://lnkd.in/dXyEYdS

Visit Opto @the Control Virtual. After the InVision Show the next virtual event.
https://lnkd.in/dTSFiee

For our OEM customers we build market specific Microscopes custom branded in series. As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment. ’reduced to the needs' - for industrial and biomed machinery builders. From Autofocus, Zoom functionality, Board level Camera integration and Software development, from HMI design to plugIns and drivers for the modules, all out of one hand.

One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. Robust and the best image in its category. Perfect for Machine Integration.
https://lnkd.in/djHpbpm

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for detecting defects on electronic boards. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Positioning a light source needs always stability and no hysteresis during adjustment. Both possible with the Opto Jointed Couplers (Kniegelenke). Test it for your application. Easy to instal, completely lockable, robust. We can send you sample immediately.

Visit Opto @the Control Virtual. After the InVision Show the next virtual event.

The main Product line from Opto are the plug and Play Imaging Modules. Together with 40 years of experience in custom manufacturing for OEM customers in Industry and Biomed Opto is your partner for ’reduced to the needs' Vision Modules inside your machine.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for Micro weld inspection. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Do not miss Photonics & Machine Vision Web Pitches.
On 17 June 2020 Markus Riedi will speak about "Digitalization of the visual appearance of surfaces with solino“.

One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. Robust and the best image in its category. Perfect for Machine Integration.
https://lnkd.in/djHpbpm

On 01.02.1980 the present Opto GmbH was founded in Munich under the name Opto Sonderbedarf GmbH with the aim of "planning, development and production of technical optical products with associated items of an electronic, electrical and mechanical nature". Now after 40 years we have removed the "Sonderbedarf" from the name but our partners still appreciate our reliability and quality in the regular delivery of customer specific imaging modules. Over the years software competence has come to the original goals and allows us today to deliver high performance intelligent sensors.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for bonded Semiconductor. Each Illumination highlights different features. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements easily.

Since trade fair "the real" CONTROL was also cancelled this year, it moved to virtual space. Please visit Opto at CONTROL-VIRTUELL:
https://lnkd.in/dsANy7m
Imaging Modules in Hall 4, solino® in Hall 6

Entrance of CONTROL-VIRTUELL here:
https://lnkd.in/gBHcTUG

YOUR VISIT COUNTS: The virtual InVision Show is still ongoing. Visit the Opto booth and help to make the event a success.
See our latest highlights around our Machine Vision Microscope with Measurement functionality and solino.
https://lnkd.in/exiZDsS

Two more OEM solutions. Four cameras, each with a different wavelength for multispectral imaging with a Stereomicroscope and a special DIC Imaging Module for a Semiconductor machine integration.
As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering besides our standard Imaging Modules, OEM Objectives, Special Microscopes and camera equipment, in series. ’reduced to the needs' - for industrial and biomed machinery builders.

One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. Together with the integrated Optoviewer or market leading Measuring Software packages, an ideal Measurement tool for every manufacturing place for High precision parts.

solino is computational imaging in perfection. If you want to know all about your semiconductor, electronic board in one shot. Challenge us and find the difference.

YOUR VISIT COUNTS: The virtual InVision Show is still ongoing. Visit the Opto booth and help to make the event a success.
See our latest highlights and the 40years of Opto video.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for all metallurgical samples. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated measurements.

One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. Robust and the best image in its category. Perfect for Machine Integration.

solino CPI is the Opto Software for computational imaging, using the stray information of the surfaces to process image DATA. With the solino Technology behind it, we get much more information of the object than we can show in an image only. Perfect for DATA mining. Challenge us and find the difference.

YOUR VISIT COUNTS: The virtual inVision show is still ongoing. The innovators in the market are all there. Visit the Opto booth and help to make the event a success. As it is a first try, all is still a little static but everybody is forced to show only the main highlights (Elevator pitch) and size doesn’t matter. I am sure it will make its way with big steps in user experience over the time, but only if you help with your interest.

One Imaging Module for one Application. Not more not less. Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. Robust and the best image in its category. Perfect for Machine Integration.

We will show more and more of our Software competence in Image processing inside our Imaging Modules. Here a first draft of an image comparator for quick quality discussions.

Some people asked me: What is a virtual exhibition. Thats it.
We honestly think such formats will become an important marketing brick in the „After Corona“ times. Good that some early adaptors took the chance to quickly commit. Have a look here.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for all metallurgical samples. One Plug and play Digital Microscope. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel. With the free OptoViewer it is also possible to execute pre calibrated

Tomorrow inVISION (May 19 - June 16, 2020) Show opens its doors!! Visit our virtual stand, see our latest developments, and talk to us here:

A perfect use case in rapid prototyping or mount your sensor, LED, Fibre, Camera. Test the Opto Jointed Coupler for your application. Easy to install, No Hysteresis, completely lockable, robust. We can send you sample immediately.

You think you saw such an image before. You might be right, but the Technology behind it, to get it, is unique. As we are analyzing the stray information of the surfaces, with solino, we get much more information of the object than usual. That means for coins that we are able to identify and value the coin individually by its physical behavior on light distribution.

As a contract manufacturer with own Design, Production and Assembly capabilities, we are delivering OEM Imaging Modules, Special Microscopes and camera equipment, in series. ’reduced to the needs' - for industrial and biomed machinery builders. From Autofocus, Zoom functionality, Board level Camera integration and Software development, from HMI design to plugIns and drivers for the modules, all out of one hand.

The Machine Vision Microscope with Coaxial Light and with Ring Light is perfect for all metallurgical samples. One Plug and play Digital Microscope out of the Imaging Module family. No change of Equipment. Magnification: 3,75x, FoV: 2,2x1,8mm, WD 36mm, 5MP Sony IMX264 monochrome/ USB 3.1, 0.9 µm/Pixel

Microscope targets for advanced calibration.

See the video here: https://lnkd.in/dEiDVKf

Imaging Modules are perfect for Industry 4.0 applications. All with the same SDK, ready to mount, ready to measure, plug&play Cameras with Optic and light integrated. One for each application, robust and the best image in its category. For stand alone use they come all with a free measurement Software.

As a contract manufacturer with own Production and Assembly capabilities we are developing and producing Imaging Modules, Special Microscopes in series. ’reduced to the needs' - for industrial and biomed machinery builders just in time. All the experience we gathered there will extract their magic in the new Opto Imaging Modules.

solino from Opto and deep learning is the ideal combination for reliable, robust and fast Quality Control. In analyzing the reflections on surfaces, solino detects ALL anomalies for further processing or Learning. With solino it is possible to digitize the human perception of products. In teaching CNN with this information it becomes the ultimate AI solution.